Loading, please wait...
    M22 G HTi | Products | EXEL China China By EXEL Industries HOME | Career | Contact form | WORLDWIDE | Site map   
Welcome to EXEL China    China   
 
   

 
Experts in Finishing and Dispensing Solutions

KREMLIN REXSON and SAMES offer the broadest and most various range of pumps and equipment for the protection of materials and applications of powder, paint, sealant and adhesives.
>> AUTOMOTIVE
 
    EXEL China KREMLIN REXSON & SAMES
Search  
 
| Select your market among the following ones |

This slideshow requires Adobe Flash Player 9.0 (or higher). JavaScript must be enabled.

  
 
 
HOME  Products
 
 
   
PRESS
 
Press releases

Downloads
 
Loading, please wait...

PRODUCTS

M22 G HTi Catalogue KREMLIN
 
The M22 G HTi is a gravity fed gun that delivers high finish quality and transfer efficiency with outstanding operator comfort. Available with one of 2 aircaps ; EP5 for hard to atomize coatings such as high solids and waterbornes or the E5 K HVLP for optmizing efficiency and HVLP compliant airspray.

Features / Benefits

Features Benefits
New ergonomics and body designReduced trigger effort The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality
Product fluid passages in stainless steel Compatible with water-based materials
Unique aircap design Unsurpassed finish quality with perfectly balanced fan
High transfer efficiency Important product savings and environmental protection
Fine thread stuffing box Fine control of the needle tightening torque for an improved sealing
E-Z adjust aircap Allows adjustment without loosening the retaining ring
Reduced number of components Easy maintenance
Choice of two 0.6 l cups available Polyacetal white cup for water and solvent-based materialsPEHD grey cup for pre-catalysed or PU materials

SPECIFICATIONS

Sprayed materials Virtually all coatings
Body of the gun Anodized Forged Aluminum
Maximum air inlet pressure (bar) 6
Recommended atomization air pressure (bar) EP5 : 2 - 3
E5 K HVLP : 1.5 - 2.5
Air consumption (m3/h) EP5 : 20.2 à 2.5 bar
E5 K HVLP : 27.2 à 2 bar
Weight (with cup) (g) 680
Maximum Fluid Temperature (°C) 50
Transfer efficiency in % (EN 13966-1) EP5 : 74 %
E5 K HVLP : 76 %
Tip Stainless steel
Needle Stainless steel
Wetted parts Stainless steel / Aluminum

FITTINGS

Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP)
Fluid inlet (gravity cup) -
 
 
  SELECT YOUR COUNTRY  
 
     China
 
   
   
  WHERE TO BUY
 
List of distributors

List of salesmen
 
 
   
 
   Conditions of use | Privacy policy | Site map    KREMLIN REXSON and SAMES are members of EXEL Industries group.
KREMLIN REXSON & SAMES - All rights reserved. © 2012   

AIRMIX® 10.14 - STAINLESS STEEL - AIRMIX® 10.14 - "START PUMP" - AIRMIX® 20.25 PUMP - STAINLESS STEEL - FLOWMAX® AIRMIX® 17.A2 PUMP - STAINLESS STEEL - M22 G HPA - - PMP 150 pump - Pressure pots - A 29 HPA Spray Gun - AIRMIX® 08.120 pump - Stainless steel - AVX Airmix® spray gun - Stainless Steel - M22 P HTi - A 29 HTi Spray Gun - M22 A BasiK HPA - EOS PUMP 15-C25 - STAINLESS STEEL - FLOWMAX® AIRMIX® 16.120F Pump - Stainless steel - Airless ASI 40 GT Spray Guns - M250 AIRLESS spray guns - FLOWMAX® 20.25 F PUMP - STAINLESS STEEL - Conventional SPRAYMIUM® electrostatic spray guns - AIRMIX® 20.15 PUMP - STAINLESS STEEL - A3 HPA Spray Gun - SPRAYMIUM® electrostatic spray guns - M22 G HTi - - Pressure regulator - Piloted - AIRMIX® - Airless® ASI 24 and 40 Spray Guns - 04.120 Pump - Stainless steel - AIRMIX® 16.120 Pump - Stainless steel - AD 60/61 HEATERS : NONEXPLOSIVE - - HP - BP 60/61 HEATERS - PMP 150 E Pump - M22 G HPA GSP - High pressure Spraymium® gun - M22 A HPA - HP Fluid Pressure Regulator - 3/4' G - - PMP 150 Pratik pump - Stainless steel pressure pots - M22 P HPA - M22 G BasiK HPA - AIRMIX® 20.25 PUMP - STAINLESS STEEL - - FLOWMAX® AIRMIX® 08.120F pump - Stainless steel - PMP 150 transfer pump - 02.75 Pump - FLOWMAX® 20.50F PUMP - STAINLESS STEEL - M22 P BasiK HPA - EOS PUMP 30-C25 - STAINLESS STEEL - -
-->